Raymarine AIS700 Class B AIS Transceiver with built-in VHF Antenna Splitter
The Raymarine AIS700 is a Class B Automatic Identification System (AIS) transceiver designed for use with Raymarine multifunction navigation display systems. As a Class B AIS transceiver, the Raymarine AIS700 not only receives broadcasts from other vessels, it also transmits your own boats information too helping you to be seen on other vessels systems.
Raymarine AIS700 Features
- Full transmit and receive AIS for enhanced situational awareness and safety
- Latest SO-TDMA networking for longer range and faster performance
- Built-in antenna splitter simplifies installation with existing VHF radio antenna
- NMEA2000, NMEA0183, PC and SeaTalkng Compatible
- Software or hardware switchable Silent Mode for enhanced security when needed
Raymarine AIS700 Specifications
Environmental
Relative humidity: Up to 93% @ 40°C (104°F)
Waterproof rating: IPx6, IPx7
Storage temperature: -20°C to +75°C (-4°F to 167°F)
Operating temperature: -15°C to +55°C (5°F to 131°F)
AIS
Operating frequency: Transmitting: 156.0MHz to 162.025 MHz, Receiving: 156.0MHz to 174.0 MHz
Class: B (transceiver)
AIS performance: 5 W SOTDMA
Channel spacing: 25 kHz
Receiver Qty: 2
Transmitter Qty: 1
Physical
VHF antenna connection: SO-239 co-axial
VHF radio connector type: SO-239 co-axial
NMEA 0183 connection: Port 1 (MFD connection): HS (IEC 61162-1) compliant, bi-directional, RS422 levels, 4 wire interface (differential signalling), configurable baud rate, Port 2 (Instrument connection: (IEC 61162-1) compliant, bi-directional, RS422 levels, 4 wire interface (differential signalling), configurable baud rate
USB connection: Micro-B
Dimensions: Height: 132.55 mm (5.22 in), Width: 171.65 mm (4.81 in), Depth: 57 mm (2.24 in)
NMEA 2000 connection: DeviceNet connector
Silent mode switch connection: Bare-ended wires x 2
GNSS antenna connector type: 50Ω TNC co-axial
GNSS (GPS)
GNSS compatibility: GPS, GLONASS
Cold start acquisition: 26 seconds (nominal)
Channels: 72
Power
Operating voltage range: 9.6 V dc to 31.2 V dc
Power consumption: 3 W
Fuse rating: 3 A
Peak current @ 12 V dc: 2.5 A
Nominal supply voltage: 12 V dc / 24 V dc
Peak current @ 24 V dc: 1.25 A
LEN (NMEA 2000 Load Equivalency Number): 1
